Edelbrock 2010 Installationshandbuch Seite 38
- Seite / 41
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
©2014 Edelbrock LLC
Part #1574, 1575, 1576
Brochure #63-1574
Rev. 9/24/14 - QT
Edelbrock GM LS3 Supercharger System for
2010 and later Grand Sport Corvettes
Installation Instructions
Page 30
216. Route the serpentine belt according to the diagram.
Note that you must slide the belt around the bottom of the
bracket to get the belt on the lower passenger side idler
pulley.
217. Use a breaker bar and a 16mm socket to push the
tensioner enough to get the belt on, then double check the
routing.
218. Use a 10mm socket, an extension bar, the four stock
bolts and OEM seal to install the throttle body. Torque the
bolts to 91 in-lbs.
219. Connect ETC harness to the throttle body motor.
220. Connect the intercooler hose assembly to the two
upper hose fittings at the front of the manifold.
210. Install the stock grommets into the coil cover brackets
supplied in Bag #6.
211. Use a 10mm socket to remove the bolts securing the
#2, #3, #6 and #7 ignition coils.
212. Install the coil cover brackets on top of the ignition
coils, then use a 10mm socket to secure them with the
stock bolts.
213. Tuck the wire harness tight against the fuel rails.
Verify that nothing will be pinched or damaged when the
coil covers are installed.
214. Use a 7/16” deep socket to install the four ball studs
supplied in Bag #6 onto the supplied coil covers.
215. Plug the OEM engine harness MAP sensor connector
into the supplied MAP harness then route the harness to the
vicinity of the air intake.
Verwandte Produkte und Handbücher für Kfz-Elektronik Edelbrock 2010
(5 Seiten)HP Surestore 64 Director Switch manuales
Manuales del propietario y guías del usuario para Almacenamiento HP Surestore 64 Director Switch.
Ofrecemos 2 manuales en pdf HP Surestore 64 Director Switch para descargar gratis por tipos de documentos: Manual de usuario
Kommentare zu diesen Handbüchern