Edelbrock 2010 Installationshandbuch PDF herunterladen (Seite 22)

Part #1574, 1575, 1576

Brochure #63-1574

Rev. 9/24/14 - QT

Edelbrock GM LS3 Supercharger System for

2010 and later Grand Sport Corvettes

Installation Instructions

Page 14

46. Disconnect MAP sensor electrical connector.

47. Disconnect the vacuum hose from the brake booster

fitting; it will be removed with the manifold.

48. Disconnect and remove the two EVAP tubes located at

the front of the manifold.

49. Disconnect passenger side PCV tube from valley

plate.

50. Remove the intake manifold and disconnect the small

vacuum hose at the rear of the manifold next to the larger

brake booster hose. Leave this hose connected to the

firewall as it will be reused later.

51. Use masking tape to cover the exposed intake ports on

the cylinder head.

52. Remove the o-ring port gaskets from the stock intake

manifold and set them aside for reuse later.

53. Use a 15mm socket to remove the two bolts retaining

the belt tensioner.

54. Disconnect the oil pressure sensor electrical connector

at the rear of the valley plate.

55. Use a 27mm wrench to remove the oil pressure sensor

from the rear of the valley plate.

56. Clear engine valley of all debris then use a 13mm

socket to remove the 11 bolts retaining the valley plate and

remove it.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Keine Kommentare

Edelbrock 2010 Installationshandbuch Seite 22