Edelbrock 29086 Bedienungsanleitung PDF herunterladen

Part #29085, #29086 & #28455

Rev. 5/09 - AJ/mc

Page 1 of 2

Brochure #63-0341

Victor Jr. LS1 EFI Intake Manifold

for GM 5.7L LS1 or Gen IV L76/L92/LS3 V8 Engines

Part #29085, #29086 & #28455

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before installing your new Intake Manifold. If you have any questions, do not hesitate to

contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm, Pacific Standard Time, Monday through Friday.

CAUTION: Make sure the vehicle’s battery has been disconnected and that the vehicle is supported on a level surface to prevent

any possibility of the vehicle moving during the installation procedure.

• MANIFOLD: The single plane Victor Jr. LS1 and L76/L92/LS3 Intake Manifolds are intended for racing and engine swap

applications. Part # 29086 includes fuel rails. A separate fuel rail kit may also be purchased under part #3638.

• EGR SYSTEM: These manifolds have no provision for EGR (exhaust gas recirculation) equipment. EGR systems are used on

most 1972 and later model vehicles, up to certain GVWs. Check local laws for requirements. These manifolds are not direct

replacement parts.

• ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. However, because this manifold system is

intended for engine swaps into a variety of vehicles, some customization may be required.

ITEM NOTES PART NUMBER AND DESCRIPTION

Throttle Body Standard Square-Bore Style Base P/N 3878 - With standard GM/Delphi IAC

P/N 38783 - With Mototron/Hitachi Linear Style IAC

Fuel Rail Kit Stock Injector Angles P/N 3638 - Includes Hold Down Brackets

Headers 1-3/4” - 1-7/8” Step, Victor Series Various. See Catalog For Details

Camshaft Developed for Carbureted Applications P/N 2215 - 220° Int./224° Exh. @ .050”, .510” Valve Lift

P/N 2216 - 230° Int./237° Exh. @ .050”, .540” Valve Lift

• KIT CONTENTS: 29085 and 29086

QTY. Description

❑ 1 Intake Manifold

❑ 1 MAP Sensor Bracket (For LS1 Style Sensor)

❑ 1 1/8”NPT to ¼” Hose Fitting (For MAP)

❑ .75 ft ¼” I.D. Vacuum Hose (For MAP)

❑ 2 Cable Bracket (Large Opening)

❑ 2 Cable Bracket (Small Opening)

❑ 1 GEN III EFI Throttle Bracket Base

❑ 4 6mm x 1.0 x 12mm Serrated Flange Hex Bolt

❑ 4 6mm x 1.0 Serrated Flange Hex Nut

❑ 10 6mm x 50mm Hex Head Capscrew

❑ 10 ¼” AN Washer

29086 Additionally Includes:

QTY

. Description

❑ 2 Machined Fuel Rail

❑ 4 Fuel Rail Stand

❑ 4 ¼”-20 x 1-¼” Hex Head Bolt

❑ 4 ¼”-20 Hex Nut

❑ 8 ¼” AN Washer

❑ 4 ¼” Lock Washer

❑ 4 ¼”-20 x ½” Socket Head Bolt

Figure 1 - Intake Manifold Tightening Sequence

10 4 1 5 8

93267

3/8” NPT

1/8” NPT

Front

• KIT CONTENTS: 28455

QTY. Description

❑ 1 Intake Manifold

❑ 1 1/8”NPT to ¼” Hose Fitting (For MAP)

❑ 4 3/8” NPT Pipe Plug

❑ 6 6mm x 50mm Hex Head Capscrew

❑ 4 6mm x 90mm Hex Head Capscrew

❑ 10 ¼” AN Washer

1 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Seite 2 - Tech-Line: 800-416-8628

Verwandte Modelle: 29085

Kommentare zu diesen Handbüchern

Keine Kommentare

Edelbrock 29086 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Edelbrock 29086 herunter. Edelbrock 29086 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 29085

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Edelbrock 29086